Frequently Asked Questions
•How do I test the condenser fan motor?
Unplug the refrigerator. Disconnect the wires to the condenser fan motor. Use a multimeter set to ohms to check for continuity across the motor terminals. If there is no continuity, the motor is likely faulty. You can also apply 120V AC directly to the motor to see if it spins. Exercise caution when working with electricity.
•Where is the start relay/overload protector located?
The start relay/overload protector is typically located on the side of the compressor. It's usually a small, black or white plastic component with wires attached. You may need a 1/4-inch nut driver to remove the cover.
•What is the proper temperature setting for the refrigerator and freezer?
A common setting for refrigerators is between 37 and 40 degrees Fahrenheit. For freezers, it's usually between 0 and 5 degrees Fahrenheit. Check your owner's manual for specific recommendations.