Frequently Asked Questions
•What voltage should I expect to see on the ribbon cable pins?
You should expect to see approximately 5V DC between the power and ground pins on the ribbon cable. Use a multimeter to check the voltage after reconnecting power. If the voltage is significantly different, it could indicate a problem with the control board or the touch panel.
•How do I test the touch panel itself to see if it's faulty?
Testing the touch panel requires a multimeter and some knowledge of electronics. You can check the continuity of the touch panel buttons by measuring the resistance across the corresponding pins on the ribbon cable connector when each button is pressed. A significant deviation from the expected resistance indicates a faulty button.
•Where can I find a replacement ribbon cable or touch panel for my Whirlpool oven?
You can find replacement parts for your Whirlpool oven at most major appliance parts retailers, both online and in physical stores. Be sure to have your oven's model number handy to ensure you order the correct part. Sites like AppliancePartsPros.com or RepairClinic.com are good resources.