Frequently Asked Questions
•How do I access the suspension rods on my Whirlpool Duet washer?
You will typically need to remove the top panel of the washer. This usually involves removing screws at the rear of the top panel and then sliding it back and lifting it off. Once the top is removed, you should have access to the suspension rods.
•What is the proper way to level a washing machine?
Use a bubble level placed on the top of the washing machine. Adjust the leveling feet at the bottom of the machine until the bubble is centered in the level. Tighten the lock nuts on the leveling feet to secure them in place. Ensure all four feet are firmly touching the floor. Rock the machine gently to confirm there's no wobble.
•Where can I find replacement suspension rods for my Whirlpool Duet washer?
You can find replacement suspension rods at most appliance parts retailers, both online and in local stores. Be sure to have your washer's model number handy to ensure you get the correct parts. Sites like AppliancePartsPros.com or RepairClinic.com are good resources.