Frequently Asked Questions
•What is the part number for the water temperature sensor on my Whirlpool Duet model?
The part number for the water temperature sensor will vary depending on the exact model number of your Whirlpool Duet washing machine. You can find the correct part number by searching online appliance parts retailers using your specific model number, which is located on a sticker typically found inside the door or on the back of the machine. Using the model number will guarantee you get a compatible replacement.
•How do I access the water temperature sensor on my Whirlpool Duet?
Accessing the water temperature sensor usually involves removing the rear access panel of the washing machine. First, disconnect the power. Then, use a 1/4-inch nut driver to remove the screws holding the panel in place. The sensor is typically located near the heating element at the bottom of the outer tub. Be careful not to damage any wiring during removal.
•Can a faulty heating element also cause the F24 error?
While the F24 error specifically points to the water temperature sensor circuit, a failing heating element can sometimes indirectly trigger the error. If the element is not heating properly, the sensor might not register the expected temperature change, leading to an erroneous reading that the control board interprets as a sensor fault. It is best to test the element to rule it out.