GE Profile Advantium Speed Oven Turntable Motor... | appliancefaults.com

Technical Background:

The Advantium's MCU (Microcontroller Unit) sends a 120V AC signal to the turntable motor relay on the control board. When the oven starts, the relay closes, sending power to the motor. Door interlock switches ensure the motor only operates when the door is closed.

Symptoms:

The turntable in your GE Profile Advantium speed oven isn't rotating, food isn't cooking evenly, or you hear a grinding noise from the base of the unit.

Possible Causes:

Failed turntable motor.
Defective turntable motor relay on the control board.
Damaged wiring harness between the control board and motor.
Faulty door switch (interlock) preventing operation.
Stuck or obstructed turntable, causing motor overload.

Solution:

1

Disconnect power to the Advantium oven at the breaker panel.
2

Remove the oven from its built-in location. You may need a 1/4-inch nut driver to remove mounting screws.
3

Disassemble the outer casing to access the turntable motor. This usually involves removing screws on the back and sides.
4

Locate the turntable motor and disconnect the wiring harness. Use a multimeter to check for 120V AC at the motor connector when the oven is supposed to be running. Be extremely careful.
5

Test the turntable motor for continuity using a multimeter. A lack of continuity indicates a failed motor.
6

Replace the turntable motor with a new one, ensuring proper wiring connections.
7

Reassemble the oven and test the turntable function.

Safety Warning:

Disconnect power to the Advantium oven at the breaker panel (Lock Out/Tag Out procedure) before any disassembly or repair. High voltage is present inside the unit, even when it is turned off. Wear appropriate safety glasses and gloves.

Prevention:

Regularly clean the turntable and oven interior to prevent obstructions. Avoid overloading the turntable with excessively heavy dishes.

Expert Tip:

Some Advantium models have a service mode that allows you to manually activate the turntable motor for testing. Consult the service manual or search online for the specific sequence for your model. You can also check the door switch continuity with a multimeter while manually depressing it.

Frequently Asked Questions

•How do I access the service mode on my specific GE Profile Advantium model?

The service mode access varies. Search online for your model number and "service mode" to find specific button combinations. Common sequences involve pressing START, then holding certain buttons simultaneously.

•What is the correct resistance reading for a functioning turntable motor?

The resistance of a functioning turntable motor is typically between 50-150 ohms. However, this can vary depending on the specific motor model. If you read infinite resistance or zero resistance, the motor is likely faulty.

•Where can I find a replacement turntable motor for my GE Profile Advantium?

You can find replacement motors at appliance parts retailers online, such as AppliancePartsPros.com or RepairClinic.com. Be sure to enter your specific model number to ensure you get the correct part.

GE Profile Advantium Speed Oven Turntable Motor Replacement: DIY Guide

Technical Background:

Symptoms:

Possible Causes:

Solution:

Safety Warning:

Prevention:

Expert Tip:

Frequently Asked Questions

•How do I access the service mode on my specific GE Profile Advantium model?

•What is the correct resistance reading for a functioning turntable motor?

•Where can I find a replacement turntable motor for my GE Profile Advantium?

Related questions

Technical Background:

Symptoms:

Possible Causes:

Solution:

Safety Warning:

Prevention:

Expert Tip: