Frigidaire Professional Gas Range Broiler Element Hole... | appliancefaults.com

Technical Background:

The gas range's Main Control Unit (MCU) regulates the voltage supplied to the broiler element. The element heats up due to resistance. A hole or hot spot indicates uneven resistance, usually caused by physical damage or material degradation. A thermistor provides temperature feedback to the MCU to maintain the desired broiler temperature.

Symptoms:

The homeowner observes a bright red or white hot spot on the broiler element of their Frigidaire licensed technician gas range. There may be a visible hole or thinning of the element at this spot. Broiling performance may be uneven or reduced.

Possible Causes:

Damaged Broiler Element
Element Support Issues
Excessive Voltage Surges
Food Debris Buildup on Element
Manufacturing Defect

Solution:

1

Disconnect power to the range at the breaker panel.
2

Allow the broiler element to cool completely.
3

Visually inspect the broiler element for any breaks, blisters, or burn marks beyond the hot spot.
4

Using a multimeter, test the broiler element for continuity. A lack of continuity indicates a break in the element requiring replacement. Resistance should be within the manufacturer's specifications (typically 15-30 Ohms).
5

Check the element support brackets for damage or corrosion. Replace as needed.
6

Replace the broiler element if damaged. Ensure the replacement is a Frigidaire-approved part.
7

Reconnect power at the breaker panel and test the broiler function.

Safety Warning:

Disconnect power to the appliance before performing any repairs. Use Lock-Out/Tag-Out (LOTO) procedures to prevent accidental re-energization. The broiler element operates at 240V AC; improper handling can result in serious injury or death.

Prevention:

Regularly clean the broiler compartment to prevent food buildup. Avoid using abrasive cleaners on the broiler element. Do not overload the broiler pan with food. Periodically inspect the broiler element for signs of wear and tear.

Expert Tip:

Many Frigidaire ranges have a diagnostic mode. Consult the service manual. Often, holding the 'Bake' and 'Broil' buttons simultaneously for 3 seconds will enter service mode where resistance values and error codes can be observed.

Frequently Asked Questions

•What is the correct resistance range for the broiler element on my specific Frigidaire Professional model?

Refer to the service manual for your exact model number. This information is critical for accurate diagnosis. You can usually find the service manual online or through a Frigidaire authorized service provider.

•How do I properly clean the broiler element without damaging it?

Avoid abrasive cleaners and harsh chemicals. Use a soft cloth or brush to remove loose debris after the element has cooled. Stubborn residue can be carefully removed with a damp cloth and a mild detergent. Ensure the element is completely dry before using the broiler.

•What are the symptoms of a failing oven control board that could mimic a faulty broiler element?

A failing oven control board can cause erratic temperature fluctuations, inconsistent heating, or complete failure of the broiler function. You may also experience error codes or other unusual behavior from the range's display panel. If you've replaced the broiler element and the problem persists, consider having the control board professionally diagnosed.

Frigidaire Professional Gas Range Broiler Element Hole or Hot Spot: Troubleshooting

Technical Background:

Symptoms:

Possible Causes:

Solution:

Safety Warning:

Prevention:

Expert Tip:

Frequently Asked Questions

•What is the correct resistance range for the broiler element on my specific Frigidaire Professional model?

•How do I properly clean the broiler element without damaging it?

•What are the symptoms of a failing oven control board that could mimic a faulty broiler element?

Related questions

Technical Background:

Symptoms:

Possible Causes:

Solution:

Safety Warning:

Prevention:

Expert Tip: