Frequently Asked Questions
•How do I test the door latch switch with a multimeter?
Disconnect power. Remove the latch. Set your multimeter to continuity mode. With the door latch open, check for continuity across the appropriate terminals (consult the wiring diagram). When the latch is closed, the continuity should change.
•What is the part number for the door latch assembly on my Whirlpool washer?
The part number depends on the specific model of your Whirlpool washer. Locate the model number on the machine (usually inside the door or on the back panel) and search for the door latch assembly using that model number on a parts website like AppliancePartsPros or RepairClinic.
•The door latch seems fine, but the washer still displays the F5 E2 error. What else could be wrong?
If the latch is aligned and functioning mechanically, the problem might be with the wiring harness connecting the latch to the control board or a faulty control board itself. Carefully inspect the wiring for any damage, breaks, or loose connections. Use a wiring diagram to verify the wiring is correct. As a last resort, the control board may need to be replaced.