Frequently Asked Questions
•How do I properly test the float switch with a multimeter?
Disconnect the dishwasher from the power source. Locate the float switch. Disconnect the wires from the float switch. Set your multimeter to the continuity setting. Place the multimeter probes on the terminals of the float switch. Manually lift the float. The multimeter should show continuity (a closed circuit) when the float is raised and no continuity (an open circuit) when the float is lowered.
•What type of detergent should I be using in my dishwasher?
Use a high-quality automatic dishwasher detergent. Avoid using hand dish soap, as it will create excessive suds and can cause leaks. Gel or powder detergents are generally recommended. Check the manufacturer's recommendations in your dishwasher's user manual.
•Where is the vent fan assembly typically located on a Whirlpool dishwasher?
The vent fan assembly is typically located near the vent on the dishwasher door, often behind the outer door panel. You will need to remove the outer door panel to access the vent fan assembly. This usually requires removing screws along the edges of the door. Be careful when removing the panel to avoid damaging any wires or components.