Frequently Asked Questions
•How do I access the suspension rods on my Roper washer?
The suspension rods are typically accessed by removing the top panel of the washer. In some models, you may need to remove the front panel as well. The rods are usually connected to the washer frame and the outer tub.
•What tools do I need to replace the drum bearing?
Replacing the drum bearing usually requires a socket set (metric), a bearing press or seal driver set, penetrating oil, and possibly a rubber mallet. This repair can be complex and may be best left to a professional.
•How do I know if the spider arm is cracked or broken?
To inspect the spider arm, you need to disassemble the washer and remove the inner drum. Carefully examine the spider arm for any visible cracks or breaks, especially around the points where it connects to the drum and the drive shaft. Even hairline cracks can cause problems.