Frequently Asked Questions
•How do I access the door lock assembly on my Roper range?
Typically, you'll need to remove the top panel or rear access panel of the range. Consult the service manual or online resources for your specific model for detailed instructions and diagrams.
•What is the part number for the door lock motor/switch assembly on my Roper range?
The part number varies depending on your specific model. You can find the correct part number by checking the model number of your range (usually located on a sticker inside the door or on the frame) and searching online parts retailers or contacting a local appliance parts supplier.
•How do I test the door switch for continuity?
Disconnect the wires from the door switch. Set your multimeter to the continuity setting (usually indicated by a diode symbol or audible beep). Place one probe on each terminal of the switch. With the door closed (switch activated), you should hear a beep or see a reading close to zero ohms. With the door open (switch deactivated), you should see an open circuit or a very high resistance reading.