Frequently Asked Questions
•Where is the door latch switch located and how do I access it?
The door latch switch is typically located on the dishwasher frame, near the door. You can access it by removing the inner door panel, usually held in place by screws. Be careful not to damage the wiring during removal.
•How do I test the float switch with a multimeter?
Disconnect the wires from the float switch. Set your multimeter to the continuity setting. When the float is in the down position (normal), the multimeter should show continuity. When you lift the float, continuity should be broken.
•If the control board is faulty, can it be repaired or does it need to be replaced?
In most cases, a faulty control board is best replaced. While some electronic components can be repaired, it's often difficult and time-consuming. Replacing the entire board is usually the more reliable and cost-effective solution.