Frequently Asked Questions
•How do I access the oven temperature sensor on my Hotpoint range?
The oven temperature sensor is typically located at the rear of the oven cavity, inside the oven. You will likely need to remove the oven racks and possibly a rear panel to access it. A 1/4-inch nut driver is usually required to remove the screws holding it in place.
•What if the oven temperature sensor tests good, but the F10 error persists?
If the sensor is good, the problem is likely with the electronic oven control (EOC) board. A stuck relay or a faulty component on the board can cause the F10 error. Replacement of the EOC board is usually necessary in this case.
•Where can I find a replacement oven temperature sensor or EOC board for my Hotpoint range?
You can purchase replacement parts from appliance parts retailers online or at local appliance repair shops. Be sure to have your range's model number handy to ensure you order the correct parts. You can typically locate the model number on a sticker or plate on the range.