Frequently Asked Questions
•How do I locate the thermal fuse in my Hotpoint dryer?
The thermal fuse is typically located on the blower housing near the exhaust vent, inside the dryer cabinet. You'll usually need to remove the rear panel to access it. It's a small, white or black component with two wires attached.
•What could cause the thermal fuse to keep blowing?
Repeatedly blown thermal fuses indicate a restriction in airflow. Common causes include a clogged lint filter, a blocked dryer vent, or a crushed or kinked vent hose. Overloading the dryer can also contribute to overheating.
•How do I test the motor start capacitor?
First, discharge the capacitor with an insulated screwdriver by shorting across its terminals. Then, use a multimeter set to capacitance mode to measure the capacitance value. Compare the measured value to the rating printed on the capacitor. A significantly lower reading indicates a faulty capacitor.