GE Washer Error Code 53: Internal Memory Fault Reset... | appliancefaults.com

Technical Background:

error code 53 on a GE washer indicates a fault within the internal memory of the main control unit (MCU). This memory stores critical operating parameters and software. A power surge, corrupted data, or a failing MCU can trigger this error. The MCU communicates with other components, like the motor control unit, via low-voltage DC signals. A malfunction in these communication paths can also cause the error.

Symptoms:

My GE washer is displaying error code 53 on the control panel. The washer won't start, and the display is flashing the error code. I tried unplugging it, but the error comes back when I plug it back in.

Possible Causes:

Power surge or spike
Corrupted software or firmware
Loose wiring connections
Faulty main control board (MCU)
Motor control unit (MCU) communication error

Solution:

1

Disconnect power: Unplug the washer from the wall outlet or turn off the breaker at the breaker panel.
2

Inspect wiring: Check all wiring connections to the main control board for looseness or damage. Use a 1/4-inch nut driver to tighten any loose connections.
3

Check Power Supply: Verify 120V AC power to the washer outlet using a multimeter. If no power, check the breaker.
4

Attempt a reset: With the washer unplugged, press and hold the START/PAUSE button for 30 seconds. Plug the washer back in and see if the error clears.
5

Software Update: If possible, check for a software update from GE.
6

Replace the Main Control Board: If the error persists, the main control board (MCU) is likely faulty and needs replacement. Order the correct replacement part for your model.
7

After replacing the board, run a diagnostic cycle to ensure the error is cleared and the washer is functioning properly.

Safety Warning:

Always disconnect power to the washer before performing any repairs. High voltage is present within the appliance, and improper handling can result in electric shock. Follow Lock Out/Tag Out (LOTO) procedures to ensure the appliance remains de-energized during repair.

Prevention:

• Use a surge protector to protect the washer from power surges.
• Avoid overloading the washer, as this can strain the motor and electrical components.
• Periodically clean the washer's drain pump filter to prevent clogs.

Expert Tip:

On some GE washer models, entering service mode can sometimes clear error codes. To enter service mode, simultaneously press and hold the START/PAUSE and SOIL LEVEL buttons for 3 seconds. Then, navigate to the error code clearing function.

Follow-up Questions:

Frequently Asked Questions

•How do I identify the correct replacement main control board for my specific GE washer model?

Locate the model number on the washer's cabinet (often behind the door or on the back panel). Use this model number to search for the correct replacement part on a reputable appliance parts website or through a local appliance parts supplier. Ensure the part number matches the original control board exactly.

•What is the voltage range that I should be seeing at the power outlet for the washer?

You should measure between 110V AC and 120V AC at the power outlet. Readings outside of this range can indicate a problem with your home's electrical system.

•Where is the main control board located in my GE washer?

The main control board is typically located behind the control panel at the top of the washer. You will likely need to remove the control panel to access it. Refer to your washer's service manual for specific disassembly instructions.

GE Washer Error Code 53: Internal Memory Fault Reset Guide

Technical Background:

Symptoms:

Possible Causes:

Solution:

Safety Warning:

Prevention:

Expert Tip:

Frequently Asked Questions

•How do I identify the correct replacement main control board for my specific GE washer model?

•What is the voltage range that I should be seeing at the power outlet for the washer?

•Where is the main control board located in my GE washer?

Related questions

Technical Background:

Symptoms:

Possible Causes:

Solution:

Safety Warning:

Prevention:

Expert Tip: