Frequently Asked Questions
•How do I access the door latch switch to test it?
You'll typically need to remove the top panel of the washer. This usually involves removing screws on the back of the washer and sliding the top panel back and off. The latch switch will be located near the door opening.
•What if the door hinges are not available for replacement?
If the exact replacement hinges are unavailable, you may be able to find similar hinges at a hardware store. Ensure the new hinges are the same size and have the same screw hole pattern. You could also try to reinforce the existing hinges with metal shims or epoxy.
•How do I properly level the washing machine?
Use a bubble level placed on top of the washing machine. Adjust the front legs by screwing them in or out until the bubble is centered. Once the front is level, check the level from side to side and adjust the rear legs accordingly. Tighten the lock nuts on the legs to secure them in place.