Frequently Asked Questions
•How do I properly clean the drain pump filter on my Amana washer?
First, disconnect the power to the washer. Locate the small access panel, typically at the bottom front. Use a 5/16-inch nut driver to remove the panel. Carefully unscrew the filter cap and remove any debris, such as lint, hair, or small objects. Rinse the filter thoroughly with water before reinstalling.
•What type of detergent is best to prevent mold growth in my washing machine?
High-efficiency (HE) detergents are recommended for most modern washing machines. Using too much detergent, even HE detergent, can lead to buildup and contribute to mold growth. Follow the manufacturer's instructions and use the correct amount of detergent for each load. Liquid detergents are generally preferred as they dissolve more easily and leave less residue than powder detergents.
•If the smell persists after cleaning, what else could be the problem?
If the odor continues, there may be mold growth in areas that are difficult to reach, such as inside the outer tub or behind the drum. In this case, you might consider using a washing machine cleaner specifically designed to eliminate stubborn odors. You could also try disassembling the washer to thoroughly clean all internal components, but this should only be attempted by experienced technicians. A small leak somewhere within the washer, that is not very obvious to locate, can also trigger mold growth.