Amana Dishwasher Door Spring Replacement: Cable Fix... | appliancefaults.com

Technical Background:

Dishwasher door springs and cables work in tandem to counterbalance the weight of the door, allowing it to open and close smoothly and remain at the desired angle. These components experience constant stress and can eventually fail due to wear and tear.

Symptoms:

The dishwasher door slams open or shut, doesn't stay open at the desired angle, or is difficult to open. The cable might be visibly broken or frayed, or the spring might be snapped or detached.

Possible Causes:

Snapped door spring.
Broken or frayed door cable.
Worn pulley system.
Misalignment of door mechanism.
Excessive door slamming.

Solution:

1

Disconnect power: Locate the breaker for the dishwasher in your breaker panel and turn it OFF. Verify no voltage is present at the dishwasher receptacle using a multimeter.
2

Access the door springs/cables: Open the dishwasher door. Locate the access panels on the sides of the dishwasher. These are usually held in place with screws. Remove the screws using a 1/4-inch nut driver.
3

Inspect the components: Visually inspect the door springs, cables, and pulleys. Identify the broken or damaged parts. Take photos for reference during reassembly.
4

Replace the spring/cable: Disconnect the broken spring or cable from the door hinge and the frame. Install the new spring or cable, ensuring it is properly seated in the pulley system and connected to the hinge. Check the tension.
5

Test the door: Slowly open and close the dishwasher door to ensure it moves smoothly and the spring/cable provides the correct tension. The door should stay open at various angles without slamming shut.
6

Reassemble: Reattach the access panels using the 1/4-inch nut driver. Ensure all screws are tightened.
7

Restore power: Turn the breaker back ON. Test the dishwasher by running a short cycle.

Safety Warning:

Lock Out/Tag Out (LOTO) the breaker before working on the dishwasher. Dishwashers operate on 120V AC. Failure to disconnect power can result in electric shock.

Prevention:

Avoid slamming the dishwasher door. Regularly inspect the door springs and cables for signs of wear and tear. Lubricate the pulley system with a silicone-based lubricant if necessary.

Expert Tip:

When replacing the door spring or cable, replace both on the same side, even if only one is broken. This ensures even tension and extends the lifespan of the repair. Often, the part number for the spring and cable are the same and they are sold as a set.

Frequently Asked Questions

•What type of lubricant should I use on the pulley system?

Use a silicone-based lubricant. Avoid using petroleum-based lubricants, as they can damage plastic components.

•How do I know if the new spring/cable has the correct tension?

The door should open and close smoothly and stay open at various angles without slamming shut. If the door is too difficult to open or slams shut, the tension is incorrect. Make sure the cable is properly routed.

•Where can I find replacement springs and cables for my Amana dishwasher?

You can find replacement parts at most appliance parts retailers or online appliance parts stores. Be sure to have your dishwasher's model number handy to ensure you order the correct parts.

Amana Dishwasher Door Spring Replacement: Cable Fix Guide

Technical Background:

Symptoms:

Possible Causes:

Solution:

Safety Warning:

Prevention:

Expert Tip:

Frequently Asked Questions

•What type of lubricant should I use on the pulley system?

•How do I know if the new spring/cable has the correct tension?

•Where can I find replacement springs and cables for my Amana dishwasher?

Related questions

Technical Background:

Symptoms:

Possible Causes:

Solution:

Safety Warning:

Prevention:

Expert Tip: