Frequently Asked Questions
•How do I access the drain pump filter on my Admiral washer?
The drain pump filter is typically located behind a small access panel at the bottom front of the washer. You may need a flat-head screwdriver to open the panel. Refer to your washer's owner's manual for specific instructions.
•How do I test the drain pump with a multimeter?
First, disconnect the wires from the drain pump. Set your multimeter to the ohms setting. Place the probes on the two terminals of the drain pump. A typical reading should be between 10-20 ohms. If you get a reading of 0 ohms or infinite ohms, the pump is likely faulty.
•What is the correct replacement part number for the drain pump on my Admiral washer?
To find the correct replacement part number, you will need the model number of your washer. You can usually find the model number on a sticker located on the back of the washer or inside the door. Once you have the model number, you can search for the drain pump part number online or contact a parts supplier.