Frequently Asked Questions
•What is the part number for the thermistor on my Admiral dryer?
The part number depends on your specific dryer model. You'll need to locate the model number of your dryer (usually on a sticker inside the door or on the back panel) and then search for the thermistor part number online or at a local appliance parts store using that model number.
•How do I test the wiring harness for continuity?
After disconnecting the dryer from the power source, use a multimeter set to the continuity setting (it usually has a sound or light indicator). Place one probe on one end of the wire and the other probe on the other end. If the multimeter beeps or the light illuminates, the wire has continuity. If not, the wire is broken and needs to be repaired or replaced.
•Where exactly is the control board located in the dryer?
The control board is typically located behind the control panel at the front of the dryer. You'll need to remove the control panel to access it. Be careful when removing the control panel, as there may be wires connected to it.