Frequently Asked Questions
•How do I replace the door seal on my Admiral dishwasher?
The door seal is typically held in place by a groove or with adhesive. Purchase the correct replacement seal and carefully remove the old seal. Clean the groove thoroughly. Apply a small amount of dishwasher-safe adhesive (if required) and press the new seal firmly into place.
•How do I test the float switch in my dishwasher?
Locate the float switch (usually at the bottom of the tub). Disconnect power to the dishwasher. Access the switch's electrical connections. Use a multimeter to check for continuity when the float is in the up and down positions. The switch should be open in one position and closed in the other. If not, replace the switch.
•Where is the water inlet valve located and how do I access it?
The water inlet valve is usually located at the back of the dishwasher, near where the water supply line connects. You may need to remove the lower access panel to reach it. Disconnect the water supply and electrical connections before removing the valve. Use a 5/16-inch nut driver for removing the valve.