Frequently Asked Questions
•How do I access the door lock assembly on my Admiral oven?
The door lock assembly is usually located at the top center of the oven, behind a small access panel. You'll typically need to remove a few screws (often using a 1/4-inch nut driver) to remove the panel and access the assembly.
•What voltage should I expect to see at the door lock motor connector?
You should typically see approximately 120V AC at the connector when the oven is attempting to lock or unlock the door. Use a multimeter set to AC voltage to measure.
•How can I test the door lock switch?
Disconnect power to the oven. Disconnect the wires from the door lock switch. Use a multimeter set to continuity. Check for continuity when the switch is in the locked and unlocked positions. The switch should show continuity in one position and no continuity in the other. If it shows continuity in both or neither, the switch is faulty and needs replacement.